Work Harness

BLACK WEAR LEATHER - 1 1/2 x 1 3/4"

These 32mm (1 1/4") straps are made to suit ZGB saddles. They loop onto the saddle dee, and are designed to secure the shaft loops/tugs in place. ...

Black Wear Leathers - 1" - 1 1/4", 1 1/2"-1 3/4", or 2"

This is designed for use with the ZGB Combined Breastplate and Traces, and enables the connection of the traces to the vehicle. This model is used...

Trace carry straps are used to prevent the traces from hanging too low, thus helping to prevent the horse from getting their leg over the trace. T...

Trace carry straps are used to prevent the traces from hanging too low, thus helping to prevent the horse from getting their leg over the trace. T...

Pole straps are used in Pairs or Team driving where a suspended pole is employed. They are attached to the Dee on the front of the breastplate and ...

The coupling strap is used in Team harness to link the breastplates of the two lead horses together. This model is supplied as standard in Cob &am...

Used to prevent the harness saddle from moving forward, this newly designed model sits flatter against the horse's back and features a new, softer ...

Stainless Steel Fittings - Leather Brass Fittings - Leather

Draft Size Kicking Strap - Nylon, SS Hardware

Leather Trace Extenders - Pair - 1 1/2" - Plain. Brass hardware.

Leather Tie Strap -  Draft Size - Plain 1" X 80" - Brass Hardware

Leather Jockey Lines - Draft Size - For three abreast - Chrome Hardware

The Hip Strap (shown in red on the diagram) supports the breeching. These are replacement straps, designed to suit the Classic Complete Breeching

Traces are what attach the horse to the vehicle. They are buckled into the end of the breastplate and attached at the other end to the carriage tre...

LEATHER CRUPPER WITH FORKS - DRAFT SIZE - Plain. Brass or Stainless Steel hardware. Folded leather.

These 25mm (1")straps are made to suit Classic harness saddles. They loop onto the saddle dee, and are designed to secure the shaft loops/tugs in p...

False Martingales are designed to keep the breastplate in place. It is fitted by attaching the stainless steel clip to the small dee at the center ...

The Brake Strap (shown in blue on the diagram) is designed to help support and balance the breastplate. Measuring 25mm (1") wide, this model is su...

Biothane Tie Strap - Draft Size - Stainless Steel Hardware

Biothane Sidebacker - Draft Size - Pair - Short - Adjusts 18"-23". Stainless steel hardware.

Draft Size - Stainless steel hardware. Shiny Bio

Draft Size -Plain Stainless steel hardware.

Made using high density foam, these removable pads are fully contoured to the horse's shape for greater comfort and performance.This model is a ...

The ZGB/Elite Wither strap (shown in red on the diagram), is padded and includes adjustable rein drops, made to Zilco's own design. These line dro...

All Zilco ZGB & Classic saddles are constructed using our unique elastomeric flexible tree, which conforms to the shape of most horses whilst g...

All Zilco ZGB & Classic saddles are constructed using our unique elastomeric flexible tree, which conforms to the shape of most horses whilst g...

Breeching is essentially part of the braking system for the harness. It is fitted around the rear end of the horse. As the horse slows, it uses the...

The ZGB Breastplate combines breastplate and traces all in one. This enables the breastplate to be used in both single and pair combinations. To c...

White plastic rings. 60" total length. Brass or Stainless steel hardware.

This is designed for use with the ZGB Combined Breastplate and Traces, and enables the connection of the traces to the vehicle. This model is part...

Trace carry straps are used to prevent the traces from hanging too low, thus helping to prevent the horse from getting their leg over the trace. T...

This is available as an optional extra. It is easily fitted by threading it onto the trace carry strap above the buckle, making a decorative cover ...

Traces are what attach the horse to the vehicle. They are buckled into the end of the breastplate and attached at the other end to the carriage tre...

This is a hard crupper dock, used to secure the horse's tail and prevent it from being flicked over the reins. It is a popular choice on tandem an...

The coupling strap is used in Team harness to link the breastplates of the two lead horses together. This model is supplied as standard in Pony Cl...

Pole straps are used in Pairs or Team driving where a suspended pole is employed. They are attached to the Dee on the front of the breastplate and ...

The original Zilco crupper dock features a seamless construction to reduce rubbing, and can be shaped to the required position for each individual ...

Pole straps are used in Pairs or Team driving where a suspended pole is employed. They are attached to the Dee on the front of the breastplate and ...

As supplied with the Zilco Standard Driving Crupper, this dock is soft and flexible and features a foam padding core for added comfort.

Roger Rings are used in Team & Tandem Harness. They are fitted to the bridle of the wheeler horse and are designed to carry the reins past the ...

This strap is designed to prevent the wither strap from sliding forward. It buckles onto the dee at the top of the breastplate wither strap and th...

Made using high density foam, these removable panels are fully contoured to the horse's shape for greater comfort and performance. This model is d...

This is used to convert a standard Classic Breastplate buckle into quick release. Simply buckle the tail into breastplate buckle. The trace attach...

This lies over the horse's rump and attaches at each end to the carriage shafts. It helps to prevent horses bucking when hitched to the carriage, p...

The coupling strap is used in Team harness to link the breastplates of the two lead horses together. This model is supplied as standard in all ZGB...