Harness Parts

The Empathy MK3 Contour Breastplate is a careful blend of ancient and proven harness systems, with lightweight materials that combine strength, wit...

As supplied with ZGB and Elite breastplates, these rein drops fit a 25mm (1") neck strap. They may be moved to the desired height on the neck stra...

Draft Size - With market straps - Plain with stainless steel hardware.

Draft Size - Plain. For belly band. Stainless steel hardware.

Draft Size - Plain. 13 inches. Stainless steel hardware.

Horse Size - Plain. Stainless Steel.

Draft Size - Plain. Stainless steel hardware.

Draft Size -Plain Stainless steel hardware.

Draft Size - Plain. Stainless steel hardware.

Draft Size- Stainless Steel Hardware

Draft Size - Plain. Stainless steel hardware. CRUPPER ONLY.

Draft Size - Stainless steel hardware. Shiny Bio

Draft Size - Pair. Plain.

Draft Size Kicking Strap - Biothane, Stainless Steel Hardware

Draft Size - Pair - Plain. Stainless steel hardware.

Draft Size - Plain. Stainless steel hardware.

Biothane Rear Check Strap - Draft Size - Plain. Stainless Steel Hardware

Biothane Shaft Loop Set - Plain. Stainless steel hardware. 2 shaft loops, 2 billets, 1 shaft loop belly band.

Biothane Sidebacker - Pair - Long - Adjusts 19"-28". Stainless steel hardware.

Biothane Sidebacker - Draft Size - Pair - Short - Adjusts 18"-23". Stainless steel hardware.

Biothane Tie Strap - Draft Size - Stainless Steel Hardware

The Brake Strap (shown in blue on the diagram) is designed to help support and balance the breastplate. Measuring 25mm (1") wide, this model is su...

These straps are designed to convert a single ZGB breastplate for use with Pairs/4-Up  They are designed to fit through the slots on the side of th...

In a Team Harness, breeching straps form a link between the breeching ring and breastplate. These 25m (1") breeching straps are suited for use wit...

Where Single Harness is used, Breeching straps are the means of connecting the breeching to the vehicle to allow braking. These breeching straps a...

In Team Harness, breeching straps form a link between the breeching ring and breastplate. These 25mm (1") wide breeching straps are made for use w...

These multi-adjustable elastic straps are fitted to the rein ring on the wheeler breastplate's neck strap, back to the dees located on the Tandem L...

This is a traditionally styled breastplate with 32mm (1 1/4") stainless steel trace buckles. The 8.5cm (3 1/3") wide breastplate features detachab...

The False Belly Band feeds through the keepers of the girth and buckles onto the tug straps (on a single harness) or the Breastplate to Saddle fitt...

False Martingales are designed to keep the breastplate in place. It is fitted by attaching the stainless steel clip to the small dee at the center ...

This is a soft, padded girth, designed for the comfort of the horse. It features 25mm (1") stainless steel buckles and is made to suit Classic Harn...

These straps are designed to buckle into each end of the girth. They are used where a little bit more length is required. 25mm (1") wide, this mod...

These 25mm (1")straps are made to suit Classic harness saddles. They loop onto the saddle dee, and are designed to secure the shaft loops/tugs in p...

The Classic Wither strap (shown in red on the diagram), is padded and features fixed rein rings. It suits Classic Breastplates. For wither straps ...

Breeching is essentially part of the braking system for the harness. It is fitted around the rear end of the horse. As the horse slows, it uses the...

LEATHER CRUPPER WITH FORKS - DRAFT SIZE - Plain. Brass or Stainless Steel hardware. Stuffed with flax seed.

LEATHER CRUPPER WITH FORKS - DRAFT SIZE - Spotted. Brass or Stainless Steel hardware. Stuffed with flax seed.

LEATHER CRUPPER WITH FORKS - DRAFT SIZE - Plain. Brass or Stainless Steel hardware. Folded leather.

LEATHER CRUPPER WITH FORKS - DRAFT SIZE - Spotted. Brass or Stainless Steel hardware. Folded leather.

Traces are what attach the horse to the vehicle. They are buckled into the end of the breastplate and attached at the other end to the carriage tre...

Traces are what attach the horse to the vehicle. They are buckled into the end of the breastplate and attached at the other end to the carriage tre...

Trace carry straps are used to prevent the traces from hanging too low, thus helping to prevent the horse from getting their leg over the trace. T...

The Empathy MK4 Contour Breastplate is a careful blend of ancient and proven harness systems, with lightweight materials that combine strength, w...

The Hip Strap (shown in red on the diagram) supports the breeching. These are replacement straps, designed to suit the Classic Complete Breeching

The Hip Straps (shown in red on the diagram) support the breeching. These are replacement straps, designed to suit the ZGB Complete Breeching

NYLON HOLD BACK STRAPS - HORSE SIZE - Pair. Plain. Chrome hardware.